600k+ Followers
600k+ Likes
160k+ Followers
FEATURED IN
Based on ShowerEnvy’s user-friendly design and industry best practices, this guide simplifies installation for you, no plumber or special tools needed.
Step 1: Remove Your Existing Shower Head
Hold the shower arm steady near the wall to avoid twisting it.
Turn the old shower head counterclockwise to unscrew.
If it’s stuck, wrap with a cloth or use pliers with padding to protect the finish
Clean off old plumber’s tape and mineral buildup from threads.
Step 2: Prepare the Shower Arm
Wrap the shower arm threads with 2–3 clockwise turns of Teflon (plumber’s) tape.
Smooth the tape for an even layer and strong seal.
Step 3: Attach the ShowerEnvy Filtered Shower Head
Place the included rubber washer into the shower head connection.
Screw the ShowerEnvy head onto the arm clockwise until snug.
Tighten by hand, no overtightening to avoid damage.
Step 4: Secure the Connection
Wrap a soft cloth around the connection point.
If needed, gently tighten with pliers to ensure a firm, leak-proof seal.
Align the head to your desired angle.
Step 5: Test and Adjust
Turn on the water, check for leaks at the connection.
If leaks appear, tighten slightly more or add another layer of tape.
Adjust spray settings and pressure to your preference.
Enjoy instant access to filtered, negative-ion-enhanced water.
Pro Tips & Extra Info
Installation time: ~2–3 minutes, no tools required.
Universal fit: Works with 99.9% of U.S. shower arms (wall-mounted and handheld) .
Handheld models: Attach the flexible hose (with washers on both ends) and hand-tighten, done!
Stone lifespan: Replace filter stones every 4–6 months (or ~8,000 gallons). ou can find replacement stones and other essential shower accessories on our website.
Why It’s Replaceable
ShowerEnvy combines mineral filtration (like tourmaline, ceramic, and vitamin beads) with negative ion technology. This setup naturally balances water pH (~5.5), reduces chlorine and heavy metals, and boosts skin and hair health, far beyond what a standard head does.
Bonus Tips for a Smooth Install
Protect surfaces: Lay a towel in the tub to catch fallen parts or tools.
Clean threads: Remove all old tape and mineral debris before Teflon application.
Use gentle taps: Only hand-tighten or lightly tighten with padded pliers; overtightening can crack fittings.
Check leaks twice: Inspect right after installation and again after the first full shower.
This simple, 5-step process turns your daily shower into a spa-like experience, charged with negative ion and mineral filtration to support skin hydration, scalp health, and a cleaner water feel. For a look into why this investment is so valuable, read about 5 powerful reasons ShowerEnvy is a must-have.
If something isn’t working right, ShowerEnvy includes a 60-day money-back guarantee and a standard international fitting. But with this quick guide, you're fully equipped to get everything working beautifully, your better shower starts today!